Erica's EDC

  • Youtube

Erica's EDC Videos - Page 34

Chris Reeve Small Sebenza 31- Cutting a pool in half

Chris Reeve Small Sebenza 31- Cutting a pool in half
Erica's EDC
3 years ago
EDC Pocket Dump for the home stead, and a pretty crazy story ...

EDC Pocket Dump for the home stead, and a pretty crazy story ...
Erica's EDC
3 years ago
SPYDERCO knives are the best knives: You were right, I was wrong!

SPYDERCO knives are the best knives: You were right, I was wrong!
Erica's EDC
3 years ago
The EDC Community has REALLY fallen apart.

The EDC Community has REALLY fallen apart.
Erica's EDC
3 years ago
My Folding Knives: Models that have made the cut for my keepers!

My Folding Knives: Models that have made the cut for my keepers!
Erica's EDC
3 years ago
FROM DULL TO SHARP: Purposely destroying my edge to re-establish it!

FROM DULL TO SHARP: Purposely destroying my edge to re-establish it!
Erica's EDC
3 years ago
PSA: this is not my job.

PSA: this is not my job.
Erica's EDC
3 years ago
Freehand Sharpening: DIAMOND STONES VS WATERSTONES

Freehand Sharpening: DIAMOND STONES VS WATERSTONES
Erica's EDC
3 years ago
I INSTANTLY FAILED THE KNIFE CHALLENGE.

I INSTANTLY FAILED THE KNIFE CHALLENGE.
Erica's EDC
3 years ago
I'VE BEEN CHALLENGED!

I'VE BEEN CHALLENGED!
Erica's EDC
3 years ago
Buck 112 from the custom shop&some used EDC gear from today!

Buck 112 from the custom shop&some used EDC gear from today!
Erica's EDC
3 years ago
Spyderco Delica 4 CruWear trimming shims in the cooler door

Spyderco Delica 4 CruWear trimming shims in the cooler door
Erica's EDC
3 years ago
Using the NGMCo. Mr. Nice Bar to install temp shims into the cooler door at work!

Using the NGMCo. Mr. Nice Bar to install temp shims into the cooler door at work!
Erica's EDC
3 years ago
Spyderco Delica4 in CruWear at 600grit DMT edge Freehand

Spyderco Delica4 in CruWear at 600grit DMT edge Freehand
Erica's EDC
3 years ago
6 Lightweight but rugged summertime knives!

6 Lightweight but rugged summertime knives!
Erica's EDC
3 years ago
TRANSPARENT KNIVES needs YOUR help!

TRANSPARENT KNIVES needs YOUR help!
Erica's EDC
3 years ago
Some alligator work edges from the past few days (that means toothy!)

Some alligator work edges from the past few days (that means toothy!)
Erica's EDC
3 years ago
MAGNACUT and 154CM sharpened to mirror polish- Does it work well?

MAGNACUT and 154CM sharpened to mirror polish- Does it work well?
Erica's EDC
3 years ago
Emerson Mini A-100 Mirror Polished 154CM

Emerson Mini A-100 Mirror Polished 154CM
Erica's EDC
3 years ago
Emerson 154CM Mirror Polish

Emerson 154CM Mirror Polish
Erica's EDC
3 years ago
EDC Pocket Dump May 2022 !

EDC Pocket Dump May 2022 !
Erica's EDC
3 years ago