Davis Blade Works DPC Initial Review: First Pitch... Home Run!
Published: 11 years ago
Here's my initial review of the long-awaited (for me), first ever sold by Davis Blade Works, DPC (Drop Point Custom). Produced by John Davis, you know him on YouTube as "jdavis882," in his new career as a full-time knife maker, the DPC is the result of years of study in the craft and lots of natural talent.
The DPC is a small sub 7-inch neck knife, flat ground of Crucible CPM S90V, heat treated to 62-63 HRC, ground to .009" behind the edge, with an 18 degrees per side single edge bevel. It comes with a custom kydex sheath, this one in a carbon fiber pattern, and a neck cord. The whole package weighs an astounding 4.3 oz.!!!
The DPC is a great first effort -- heck, it's a great effort period! Great job, John! I'm proud to be one of your first customers. Below is some contact information for John, his company and his channel...
Here's the link to John's YouTube channel, DavisBladeWorks:
http://www.youtube.com/channel/UCOdMGT2UQFZSvKFN6OdHEuw
The best way to contact John is by email. Here's his address:
John@davisbladeworks.com
The DPC is a small sub 7-inch neck knife, flat ground of Crucible CPM S90V, heat treated to 62-63 HRC, ground to .009" behind the edge, with an 18 degrees per side single edge bevel. It comes with a custom kydex sheath, this one in a carbon fiber pattern, and a neck cord. The whole package weighs an astounding 4.3 oz.!!!
The DPC is a great first effort -- heck, it's a great effort period! Great job, John! I'm proud to be one of your first customers. Below is some contact information for John, his company and his channel...
Here's the link to John's YouTube channel, DavisBladeWorks:
http://www.youtube.com/channel/UCOdMGT2UQFZSvKFN6OdHEuw
The best way to contact John is by email. Here's his address:
John@davisbladeworks.com