Legion Premiere Look at the Mil Spec Monkey MSM-KB-002 in D2 Steel.
Published: 1 week ago
Mil-SPEC Monkey in D2 steel
https://milspecmonkey.com/store/blades/1120-3368-ka-bar-msm-knife-002-taprack-sheath.html#/50-color-marine_coyote/182-handle_color-black
Overall length: 8.5”
Blade length: 3.5”
Blade material: D2 Steel
Blade hardness: HRC
Blade thickness: 6.4mm
Blade width: 1.45“
Handle length: 3.94”
Handle width: 1.36“
Handle thickness: “
Handle material: Paracord Wrap
Weight: oz
Sheath weight: oz
Total Weight: oz
D2 Steel, Approx 3.5" Blade, overall 8.5" x 2", all blades have a black coat and OD-Green or Black cord wrap handle, however we are offering sheath color options of black, marine coyote, and multicam.
It has been a lot longer than we all wanted, but our collaboration knife with KA-BAR is now available in the 002 variant. Being very similar to the original 001, this 002 variant sports a drop point blade to give more options.
The general idea is to have a wide blade with an enhanced thumb ramp and thick enough for plenty of abuse. All kinds of grips are possible with the thumb ramp particularly forming great to one's hand in a reverse blade forward grip. The upper / top end of the blade comes unsharpened since knife laws between states get complicated there, however can easily be sharpened if desired. A classic cord wrap is used for the handle which offers a good grip even when wet and if you want to get fancy you can always cut it off and wrap your own. Being made overseas we understand not everyone will be happy about that, but there are several reasons why: The main one being we looked into USA options, but it was going to take a lot longer and cost a lot more for no real change in quality. In the end we wanted this blade to be available to common joe and actually be used like a tool instead of paying a load for and then ending up trapped in a safe. We ran into a big bottleneck with the factory sheath not having quite enough retention so had Tap Rack Holsters make us some pro sheaths which comes with the proven BladeTech Belt mount and we'll toss in some short malice clips for further mounting options.
Don’t forget to hit the like button!
Please help support our vets by raising awareness of the tragedy that is Veteran suicide by visiting the links below and reaching out to those in your life. If you know a vet don’t hesitate to reach out to them!
Suicide Prevention Hotline: 1-800-273-8255
https://suicidepreventionlifeline.org/
Mission 22
https://mission22.com/
Til Valhalla Project
https://tilvalhallaproject.com/
Message from Martin Miller, Army Veteran 66-69
1-800-273- TALK, press 1 for Vets saves lives. They're the Shining Stars of the VA. My brothers and sisters, you're not alone. The help you
deserve and have earned is just a phone call away. It takes the courage and strength of a warrior to ask for help. Please call if you need help. Suicide is a permanent solution to a temporary crisis
I love this community! The knife, sword, saw, fatwood, bushcrafters, and all the new people who have subscribed! We are LEGION!
You guys' ROCK!
LIKE! SHARE! SUBSCRIBE! Also don't forget to check out the other content creators! They are all good people with great
https://milspecmonkey.com/store/blades/1120-3368-ka-bar-msm-knife-002-taprack-sheath.html#/50-color-marine_coyote/182-handle_color-black
Overall length: 8.5”
Blade length: 3.5”
Blade material: D2 Steel
Blade hardness: HRC
Blade thickness: 6.4mm
Blade width: 1.45“
Handle length: 3.94”
Handle width: 1.36“
Handle thickness: “
Handle material: Paracord Wrap
Weight: oz
Sheath weight: oz
Total Weight: oz
D2 Steel, Approx 3.5" Blade, overall 8.5" x 2", all blades have a black coat and OD-Green or Black cord wrap handle, however we are offering sheath color options of black, marine coyote, and multicam.
It has been a lot longer than we all wanted, but our collaboration knife with KA-BAR is now available in the 002 variant. Being very similar to the original 001, this 002 variant sports a drop point blade to give more options.
The general idea is to have a wide blade with an enhanced thumb ramp and thick enough for plenty of abuse. All kinds of grips are possible with the thumb ramp particularly forming great to one's hand in a reverse blade forward grip. The upper / top end of the blade comes unsharpened since knife laws between states get complicated there, however can easily be sharpened if desired. A classic cord wrap is used for the handle which offers a good grip even when wet and if you want to get fancy you can always cut it off and wrap your own. Being made overseas we understand not everyone will be happy about that, but there are several reasons why: The main one being we looked into USA options, but it was going to take a lot longer and cost a lot more for no real change in quality. In the end we wanted this blade to be available to common joe and actually be used like a tool instead of paying a load for and then ending up trapped in a safe. We ran into a big bottleneck with the factory sheath not having quite enough retention so had Tap Rack Holsters make us some pro sheaths which comes with the proven BladeTech Belt mount and we'll toss in some short malice clips for further mounting options.
Don’t forget to hit the like button!
Please help support our vets by raising awareness of the tragedy that is Veteran suicide by visiting the links below and reaching out to those in your life. If you know a vet don’t hesitate to reach out to them!
Suicide Prevention Hotline: 1-800-273-8255
https://suicidepreventionlifeline.org/
Mission 22
https://mission22.com/
Til Valhalla Project
https://tilvalhallaproject.com/
Message from Martin Miller, Army Veteran 66-69
1-800-273- TALK, press 1 for Vets saves lives. They're the Shining Stars of the VA. My brothers and sisters, you're not alone. The help you
deserve and have earned is just a phone call away. It takes the courage and strength of a warrior to ask for help. Please call if you need help. Suicide is a permanent solution to a temporary crisis
I love this community! The knife, sword, saw, fatwood, bushcrafters, and all the new people who have subscribed! We are LEGION!
You guys' ROCK!
LIKE! SHARE! SUBSCRIBE! Also don't forget to check out the other content creators! They are all good people with great