Doug Ritter RSK® MK1-G2
Published: 2 years ago
*from KnifeWorks.com:
The next generation of survival authority and Knife Rights Chairman Doug Ritter's popular RSK® Mk1 ambidextrous folder, manufactured by Hogue, is now available EXCLUSIVELY from KnifeWorks. The RSK® Mk1-G2.
Ritter explained, "when Benchmade advised me in the summer of 2016 that as part of a restructuring that they were no longer going to produce my RSK knives, it was quite a shock. These highly regarded knives have been my primary source of income for the last decade. That income is what has allowed me to spend the majority of my time on Knife Rights' efforts to free knife owners from irrational knife restrictions. This has resulted in 34 bills repealing knife bans enacted in 23 states, nine anti-knife bills defeated and numerous litigation victories since 2010. The sales also support my Equipped To Survive™ site and my participation on numerous national and international safety and survival standards committees. Walking away from Knife Rights and ETS due to the loss of knife income simply wasn't an option I would consider."
Jim Bruhns, Hogue Managing Partner, said, "We couldn't be prouder to partner with Doug to manufacture his highly regarded knives. That this will allow Doug to continue to fight for our rights is just icing on the cake for all of us at Hogue who one hundred percent support Knife Rights!
Since Ritter first saw the original Benchmade prototype knife with the ambidextrous AXIS* lock, designed by knifemakers Bill McHenry and Jason Williams, he has been a huge fan. Ritter took note that the patent on that outstanding lock expired in 2016.
Ritter has dubbed the improved version of this lock used in this next generation RSK® Mk1-G2 the ABLE™ Lock—standing for "Ambidextrous Bar Lock Enhanced." The ABLE™ Lock incorporates superior finish and geometry for smoother operation, a tougher lock bar and Wolff omega springs.
W.C. Wolff Co. is famed worldwide for their superior springs engineered and manufactured in Newtown Square, Pennsylvania. Wolff springs are respected for outstanding durability, thus providing enhanced reliability for the ABLE™ Lock. Wolff also provides the torsion springs used in Hogue's automatic knives.
The ABLE™ Lock liners are secured by two offset screws. The additional screw and offset design provides added strength and rigidity to the knife and lock assembly.
Jimping on the liners, handle and the blade thumb ramp have been redesigned to be more thumb-friendly, while still providing plenty of purchase.
The RSK® Mk1-G2 blade retains the exact same widely acclaimed 3.4-inch drop point profile with a high flat grind as Ritter designed for the original RSK™ Mk1. It is produced from premium Crucible Industries CPM 20CV powder metallurgy high carbon stainless steel produced in the USA. It has a stonewashed finish to provide added corrosion resistance and which also helps hide scratches. The blade is cryogenically processed to achieve a hardness of HRC 61-62 for an optimum blend of edge-holding and toughness.
The blade rides between phosphor bronze washers for the utmost in simplicity and reliability. The pivot screw is adjustable using a standard Torx driver. Dual thumbstuds, which carry through the tri-wing theme of the ABLE™ Lock lockbar, allow for ambidextrous opening.
The blade is laser engraved with Doug Ritter's logo and the steel type on the front and the Hogue logo and "USA" on the reverse.
The handle scales are CNC-machined from black G10 high-pressure laminate aerospace composite. Compared to the original RSK® Mk1, it provides improved ergonomics. An "index bump" on the underside offers added security and comfort. The radial and checkered pattern machined into the surface combines effective grip with stunning esthetics. Ritter credits a fixed blade handle design by Les George on a Hydra Fighter he donated to Knife Rights' Ultimate Steel 2015 fundraiser as inspiration for that motif. The handle is 0.16 inches (4 mm) longer to allow for the lanyard hole to be located at the tail end of the handle.
The handle incorporates open construction with three standoffs. Compared to the solid back of the original RSK Mk1, this allows for easier cleaning. The RSK® Mk1-G2 is neutrally balanced, Ritter's ideal for this size knife. The RSK® Mk1-G2 with the G-10 handle weighs in at 4.5 oz (127 g) with the clip.
The RSK® Mk1-G2 carries with a custom stonewashed stainless steel deep-carry pocket clip. The clip is reversible for ambidextrous tip-up carry. While retained by two screws, a standard 3-screw pattern (Benchmade, Spyderco, Emerson, etc.) is provided so that owners can exchange the clip for any of the wide variety of aftermarket and custom clips available. Brass inserts provide secure retention of the clip screws.
Like every Hogue-built knife, the RSK® Mk1-G2 is manufactured in the USA and is backed by three generations of manufacturing expertise and a limited lifetime warranty.
The next generation of survival authority and Knife Rights Chairman Doug Ritter's popular RSK® Mk1 ambidextrous folder, manufactured by Hogue, is now available EXCLUSIVELY from KnifeWorks. The RSK® Mk1-G2.
Ritter explained, "when Benchmade advised me in the summer of 2016 that as part of a restructuring that they were no longer going to produce my RSK knives, it was quite a shock. These highly regarded knives have been my primary source of income for the last decade. That income is what has allowed me to spend the majority of my time on Knife Rights' efforts to free knife owners from irrational knife restrictions. This has resulted in 34 bills repealing knife bans enacted in 23 states, nine anti-knife bills defeated and numerous litigation victories since 2010. The sales also support my Equipped To Survive™ site and my participation on numerous national and international safety and survival standards committees. Walking away from Knife Rights and ETS due to the loss of knife income simply wasn't an option I would consider."
Jim Bruhns, Hogue Managing Partner, said, "We couldn't be prouder to partner with Doug to manufacture his highly regarded knives. That this will allow Doug to continue to fight for our rights is just icing on the cake for all of us at Hogue who one hundred percent support Knife Rights!
Since Ritter first saw the original Benchmade prototype knife with the ambidextrous AXIS* lock, designed by knifemakers Bill McHenry and Jason Williams, he has been a huge fan. Ritter took note that the patent on that outstanding lock expired in 2016.
Ritter has dubbed the improved version of this lock used in this next generation RSK® Mk1-G2 the ABLE™ Lock—standing for "Ambidextrous Bar Lock Enhanced." The ABLE™ Lock incorporates superior finish and geometry for smoother operation, a tougher lock bar and Wolff omega springs.
W.C. Wolff Co. is famed worldwide for their superior springs engineered and manufactured in Newtown Square, Pennsylvania. Wolff springs are respected for outstanding durability, thus providing enhanced reliability for the ABLE™ Lock. Wolff also provides the torsion springs used in Hogue's automatic knives.
The ABLE™ Lock liners are secured by two offset screws. The additional screw and offset design provides added strength and rigidity to the knife and lock assembly.
Jimping on the liners, handle and the blade thumb ramp have been redesigned to be more thumb-friendly, while still providing plenty of purchase.
The RSK® Mk1-G2 blade retains the exact same widely acclaimed 3.4-inch drop point profile with a high flat grind as Ritter designed for the original RSK™ Mk1. It is produced from premium Crucible Industries CPM 20CV powder metallurgy high carbon stainless steel produced in the USA. It has a stonewashed finish to provide added corrosion resistance and which also helps hide scratches. The blade is cryogenically processed to achieve a hardness of HRC 61-62 for an optimum blend of edge-holding and toughness.
The blade rides between phosphor bronze washers for the utmost in simplicity and reliability. The pivot screw is adjustable using a standard Torx driver. Dual thumbstuds, which carry through the tri-wing theme of the ABLE™ Lock lockbar, allow for ambidextrous opening.
The blade is laser engraved with Doug Ritter's logo and the steel type on the front and the Hogue logo and "USA" on the reverse.
The handle scales are CNC-machined from black G10 high-pressure laminate aerospace composite. Compared to the original RSK® Mk1, it provides improved ergonomics. An "index bump" on the underside offers added security and comfort. The radial and checkered pattern machined into the surface combines effective grip with stunning esthetics. Ritter credits a fixed blade handle design by Les George on a Hydra Fighter he donated to Knife Rights' Ultimate Steel 2015 fundraiser as inspiration for that motif. The handle is 0.16 inches (4 mm) longer to allow for the lanyard hole to be located at the tail end of the handle.
The handle incorporates open construction with three standoffs. Compared to the solid back of the original RSK Mk1, this allows for easier cleaning. The RSK® Mk1-G2 is neutrally balanced, Ritter's ideal for this size knife. The RSK® Mk1-G2 with the G-10 handle weighs in at 4.5 oz (127 g) with the clip.
The RSK® Mk1-G2 carries with a custom stonewashed stainless steel deep-carry pocket clip. The clip is reversible for ambidextrous tip-up carry. While retained by two screws, a standard 3-screw pattern (Benchmade, Spyderco, Emerson, etc.) is provided so that owners can exchange the clip for any of the wide variety of aftermarket and custom clips available. Brass inserts provide secure retention of the clip screws.
Like every Hogue-built knife, the RSK® Mk1-G2 is manufactured in the USA and is backed by three generations of manufacturing expertise and a limited lifetime warranty.