Beginning cut testing on newer TwoSun S90V blade (Knife content)
Published: 4 years ago
Hey all, a while back over on Cedrick & Ada's channel, he put a TwoSun TS128 in S90V up to the cut test, and it got some lackluster reports.
I did my own test on the knife as I had one as well, and while mine did fare a bit better (300 cuts to his 200-something), mine also had a 15 degree WorkSharp edge on it, rather than his 17 degree KME edge.
I just got this TwoSun in, and it's quite a bit newer model (TS187) and I had a hell of a time raising a burr on it while sharpening it on my WorkSharp blade grinding attachment (keep in mind it's a powered belt with 120-grit to start with).
That got me excited to try it out with the same rope cutting test. It's all sharpened up and highly polished to the same 15 degree WorkSharp edge, so I'll be spending the next couple days doing some cutting. I'm highly hopeful for better results.
I did my own test on the knife as I had one as well, and while mine did fare a bit better (300 cuts to his 200-something), mine also had a 15 degree WorkSharp edge on it, rather than his 17 degree KME edge.
I just got this TwoSun in, and it's quite a bit newer model (TS187) and I had a hell of a time raising a burr on it while sharpening it on my WorkSharp blade grinding attachment (keep in mind it's a powered belt with 120-grit to start with).
That got me excited to try it out with the same rope cutting test. It's all sharpened up and highly polished to the same 15 degree WorkSharp edge, so I'll be spending the next couple days doing some cutting. I'm highly hopeful for better results.