First Look: TwoSun TS298 [And Weak Framelock Detent Fix] (Knife Content)
Published: 3 years ago
Got this guy in a short time ago, and it's my first framelock that had a weak detent, so I wanted to investigate. Did this in order
Detent bearing was sitting beautifully in the detent hole and there wasn't a burr there.
Checked pivot tightness (obvious, but if it's too tight, it can inhibit action).
Adjusted tension on frame lock by bending it SLIGHTLY.
Bingo! We're back in business.
Specs:
3.66" 14C28N blade with 3.7mm stock thickness
4.8 oz / 136 gram weight
0.51" handle thickness (Ti)
Frame Lock
Ceramic bearings & detent ball
Detent bearing was sitting beautifully in the detent hole and there wasn't a burr there.
Checked pivot tightness (obvious, but if it's too tight, it can inhibit action).
Adjusted tension on frame lock by bending it SLIGHTLY.
Bingo! We're back in business.
Specs:
3.66" 14C28N blade with 3.7mm stock thickness
4.8 oz / 136 gram weight
0.51" handle thickness (Ti)
Frame Lock
Ceramic bearings & detent ball