Slippy-J Sunday: TwoSun TS206 Multitool - RattleSnake Design in G10 & 14C28N Blade
Published: 3 years ago
First off, I don't suggest any tanto knife without a lock due to it's intention, but there are a few of them out there. Just be careful. This knife is also offered in a drop point which might be more practical.
This thing is much larger than your standard swiss army knife (even the full size like the Ranger). The blade is just a touch under 3". The scissors have an integrated spring like Wenger made when they were around. Much more difficult to replace, but won't fall out like Victorinox's implementation.
Due to it's larger size and using the slip joint backspring route, these tools are a bit difficult to get out. Not impossible, unless you're referring to the awl / reamer on the back side. They used the same spring stock for that as the rest, but cut it in half to have it share the same layer as the scissors. As a result, without having much grip, you need claws of adamantium to pull the tool out without breaking yourself. I actually grabbed it with the tip of my pliers to get it out for the photo.
Specs:
2.95" 14C28N blade with 2.3 mm stock thickness
5.25 oz / 149 gram weight
0.66" handle thickness (G10)
Bronze washers
This thing is much larger than your standard swiss army knife (even the full size like the Ranger). The blade is just a touch under 3". The scissors have an integrated spring like Wenger made when they were around. Much more difficult to replace, but won't fall out like Victorinox's implementation.
Due to it's larger size and using the slip joint backspring route, these tools are a bit difficult to get out. Not impossible, unless you're referring to the awl / reamer on the back side. They used the same spring stock for that as the rest, but cut it in half to have it share the same layer as the scissors. As a result, without having much grip, you need claws of adamantium to pull the tool out without breaking yourself. I actually grabbed it with the tip of my pliers to get it out for the photo.
Specs:
2.95" 14C28N blade with 2.3 mm stock thickness
5.25 oz / 149 gram weight
0.66" handle thickness (G10)
Bronze washers