TwoSun Tuesday: TS219 Nightstalker Jelly-Jerry Design in Ti & CF with 14C28N Blade
Published: 2 years ago
This is a relatively new model (at the time of the review). I'm loving it, myself. It reminds me a lot of the TS224 Viper, but the blade is a tad longer, the tip is reigned in, and the ergos are sublime.
Mine did, however, come with some detent slop/lash. It doesn't affect the deployment, and you don't feel it unless it's closed, with the spine of the blade facing the ground, but it's still a fault nonetheless. Seems as though someone at the factory got a little overzealous when grinding the detent hole.
Specs:
3.6" 14C28N blade with 3.8 mm stock thickness
4.06 oz / 115 gram weight
0.54" handle thickness (Ti & CF)
Frame Lock
Ceramic bearings & detent ball
Mine did, however, come with some detent slop/lash. It doesn't affect the deployment, and you don't feel it unless it's closed, with the spine of the blade facing the ground, but it's still a fault nonetheless. Seems as though someone at the factory got a little overzealous when grinding the detent hole.
Specs:
3.6" 14C28N blade with 3.8 mm stock thickness
4.06 oz / 115 gram weight
0.54" handle thickness (Ti & CF)
Frame Lock
Ceramic bearings & detent ball