Unboxing: Strider Lovers Get In Here!
Published: 12 years ago
Released for the ECCKS 2012
CPM S30V "PVD" Finish Flat Ground Blade. Solid PVD Titanium Frame Lock design with a Grippy BLACK G-10 upper scale. Oversized pivot. Dual Heat Treated Stainless thumb studs with an Oval opener. New Indexing Lock Scallop.
Lockbar Stabilizer. Serrated Thumb ramps on the top of the frame and on the top of the blade. Bead blast removable titanium pocket clip- Tip up carry.
Specifications
Blade Length (tip to frame): 3 1/2"
Cutting edge: 3"
Overall Length: 8 1/8"
Closed Length: 4 5/8"
Blade Steel: CPM S30V ~ PVD Finish
Handle Material: PVD Titanium w/ BLACK G-10
Sheath Description: Pocket Clip
Weight: 4.5 ounces / 126 grams
About PVD Coating
Physical Vapor Deposition (PVD) is a process to produce a metal vapor that can be deposited on electrically conductive materials as a thin highly adhered pure metal or alloy coating. The process is carried out in a vacuum chamber at high vacuum (10-6 torr) using a cathodic arc source.
Single or multi-layer coatings can be applied during the same process cycle. Additionally the metal vapor can be reacted with various gases to deposit Oxides, Nitrides, Carbides or Carbonitrides.
CPM S30V "PVD" Finish Flat Ground Blade. Solid PVD Titanium Frame Lock design with a Grippy BLACK G-10 upper scale. Oversized pivot. Dual Heat Treated Stainless thumb studs with an Oval opener. New Indexing Lock Scallop.
Lockbar Stabilizer. Serrated Thumb ramps on the top of the frame and on the top of the blade. Bead blast removable titanium pocket clip- Tip up carry.
Specifications
Blade Length (tip to frame): 3 1/2"
Cutting edge: 3"
Overall Length: 8 1/8"
Closed Length: 4 5/8"
Blade Steel: CPM S30V ~ PVD Finish
Handle Material: PVD Titanium w/ BLACK G-10
Sheath Description: Pocket Clip
Weight: 4.5 ounces / 126 grams
About PVD Coating
Physical Vapor Deposition (PVD) is a process to produce a metal vapor that can be deposited on electrically conductive materials as a thin highly adhered pure metal or alloy coating. The process is carried out in a vacuum chamber at high vacuum (10-6 torr) using a cathodic arc source.
Single or multi-layer coatings can be applied during the same process cycle. Additionally the metal vapor can be reacted with various gases to deposit Oxides, Nitrides, Carbides or Carbonitrides.