Review of the Snaggle Tooth - The Kind for your Folding Knife - For Lefties Too - YOU WANT ONE!!
Published: 6 years ago
USE coupon code "jake" for 20% off your entire order.
If you want to buy a Snaggle Tooth then visit their website.
https://www.snaggletoothmf.com
You buy directly from the manufacturer.
YES, they have them for LEFTIES too.
MEASUREMENTS farther below.
Tell them JAKE at Canadian Cutting Edge sent you.
If you want one of those Cold Steel Recon 1 knives that is SATIN and SABER grind then check out my overview of one: https://youtu.be/8IyDBHY2IIM
That RECON 1 is ONLY available at Blades Canada: https://goo.gl/RoLzaR Tell them too that Jake from Canadian Cutting Edge sent you.
MEASUREMENTS for Snaggletooth
These are manual measurements that I took myself and are subject to error.
The thumbstud hole needs to be at least 2.75mm or 0.11" in diameter and no more than 3.3mm or 0.13" in diameter. Closer to the smaller size is BEST.
The thumbstud hole needs to be between 3mm and 5mm (0.118" to 0.21") from the spine of the blade The greater distance is preferred for a snug fit. When the hole is too close to the spine of the blade then the snaggletooth is harder to make sit flush on the spine of the blade.
Finally, when the knife is in the closed position you need at LEAST 8mm = 0.315 space from the spine of the blade to the nearest liner, frame, handle material. 8mm is required if you want to be able to close the knife fully when the snaggle tooth is installed.
Email me if you want a picture with these measurements on it. Email address is at the very bottom of this writeup.
I will honour this offer to email you the picture only until the end of April 2018 (I tend to lose files over time- not the best organizational skills here, I am much to much a creative person.)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Thank-you for using my links, it helps fund my channel. IF you are watching a video that is more than ONE MONTH old please take the time to use a GearBest link on a new review video and then search for the knife you want after using that link BECAUSE GearBest only gives me credit when you use links that are less than 30 days old.
I do get credit for your entire purchase IF you open GearBest buy clicking on one of my referral links. THANKS. If you have any questions, please ASK.
+++++++++++++++++++++++++++++++++++++++++++++++
Support CCE via PATREON: https://www.patreon.com/CCE
Come see us on Facebook
https://www.facebook.com/CanadianCuttingEdge
Instagram
https://www.instagram.com/canadiancuttingedge
Email: CanadianCuttingEdge AT gmail.com
If you want to buy a Snaggle Tooth then visit their website.
https://www.snaggletoothmf.com
You buy directly from the manufacturer.
YES, they have them for LEFTIES too.
MEASUREMENTS farther below.
Tell them JAKE at Canadian Cutting Edge sent you.
If you want one of those Cold Steel Recon 1 knives that is SATIN and SABER grind then check out my overview of one: https://youtu.be/8IyDBHY2IIM
That RECON 1 is ONLY available at Blades Canada: https://goo.gl/RoLzaR Tell them too that Jake from Canadian Cutting Edge sent you.
MEASUREMENTS for Snaggletooth
These are manual measurements that I took myself and are subject to error.
The thumbstud hole needs to be at least 2.75mm or 0.11" in diameter and no more than 3.3mm or 0.13" in diameter. Closer to the smaller size is BEST.
The thumbstud hole needs to be between 3mm and 5mm (0.118" to 0.21") from the spine of the blade The greater distance is preferred for a snug fit. When the hole is too close to the spine of the blade then the snaggletooth is harder to make sit flush on the spine of the blade.
Finally, when the knife is in the closed position you need at LEAST 8mm = 0.315 space from the spine of the blade to the nearest liner, frame, handle material. 8mm is required if you want to be able to close the knife fully when the snaggle tooth is installed.
Email me if you want a picture with these measurements on it. Email address is at the very bottom of this writeup.
I will honour this offer to email you the picture only until the end of April 2018 (I tend to lose files over time- not the best organizational skills here, I am much to much a creative person.)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Thank-you for using my links, it helps fund my channel. IF you are watching a video that is more than ONE MONTH old please take the time to use a GearBest link on a new review video and then search for the knife you want after using that link BECAUSE GearBest only gives me credit when you use links that are less than 30 days old.
I do get credit for your entire purchase IF you open GearBest buy clicking on one of my referral links. THANKS. If you have any questions, please ASK.
+++++++++++++++++++++++++++++++++++++++++++++++
Support CCE via PATREON: https://www.patreon.com/CCE
Come see us on Facebook
https://www.facebook.com/CanadianCuttingEdge
https://www.instagram.com/canadiancuttingedge
Email: CanadianCuttingEdge AT gmail.com