BEST UPGRADE - CLAMP on the Work Sharp Precision Adjust - Thanks to GearConnect and Gritomatic.com
Published: 2 years ago
There are a variety of upgrades for the WorkSharp Precision Adjust - EXPAND this section for links for the ones seen in this video.
A. MULTI UPGRADE KIT: https://www.gritomatic.com/products/6-multi-upgrade-for-work-sharp-precision-adjust (Everything except the stones*, that you need to make your WSPA a LOT better.
The kit includes:
KakBritva Wide Slit Clamp with 7 mm opening (special)
GearConnect mini-adapter - reuse more of your WSPA, see: https://youtu.be/lfpFZ55wie4)
V-Block Clamp Support
LE Series 6" Stone Holder
*Don't forget to buy some 6" stones - https://www.gritomatic.com/collections/6-stone-sets
B. CLAMP & ADAPTER only - If you don't want to buy the Multi Upgrade Kit and only want to upgrade the clamp but none of the other items mentioned in this video, then you need to buy BOTH of the following parts for the same cost as the whole MULTI UPGRADE KIT, so you may as well just buy the kit listed above:
a. KakBritva Wide Central Clamp Adapter: https://www.gritomatic.com/products/gearconnect-for-work-sharp-precision-adjust-kakbritva-wide-central-clamp
b. Wide Central Slit Clamp: https://www.gritomatic.com/products/wide-central-clamp-with-slit
C. For ONLY the V-Block Clamp Support for Work Sharp Precision Adjust (This part is also included in the MULTI UPGRADE KIT): https://www.gritomatic.com/products/clamp-support-for-work-sharp-precision-adjust - The VIDEO for this is here: https://youtu.be/7BRHVA2U6m0
D. For ONLY the 6" Stone Holder for Work Sharp Precision Adjust - 2nd Gen (This part is also included in the MULTI UPGRADE KIT): https://www.gritomatic.com/products/le-series-6-stone-holder-for-work-sharp-precision-adjust-1
E. HEX Screwdrivers
a. 4mm with BALL END - $7.10 - https://www.gritomatic.com/products/ball-end-hex-screwdriver
b. LE Series Hex Screwdriver COMPLETE Set + Holder: https://www.gritomatic.com/products/le-series-hex-screwdriver-set-on-holder
c. Individual HEX driver Available in 5 different sizes: https://www.gritomatic.com/products/hex-screwdriver
+ MUCH more at Gritomatic.com
++++++++++++++++++++++
Support CCE via PATREON: https://www.patreon.com/CCE
Or click "JOIN" on any of my YouTube videos.
++++++++++++++++++++++
CONTACT ME / SOCIAL MEDIA
The BEST way to contact me is via E-mail: CanadianCuttingEdge AT gmail.com
- I am learning to use Instagram more, but it's not yet a strong habit for me yet, https://www.instagram.com/canadiancuttingedge
----
00:00 Introduction
00:52 Items NEEDED
01:55 Disassemble the original clamp
03:09 Prep for Assembly
03:25 Prepart the KakBritva Clamp
04:07 Finally - the ASSEMBLY
06:07 Use the Clamp
07:43 An ALTERNATIVE
----
@gritomatic6834
A. MULTI UPGRADE KIT: https://www.gritomatic.com/products/6-multi-upgrade-for-work-sharp-precision-adjust (Everything except the stones*, that you need to make your WSPA a LOT better.
The kit includes:
KakBritva Wide Slit Clamp with 7 mm opening (special)
GearConnect mini-adapter - reuse more of your WSPA, see: https://youtu.be/lfpFZ55wie4)
V-Block Clamp Support
LE Series 6" Stone Holder
*Don't forget to buy some 6" stones - https://www.gritomatic.com/collections/6-stone-sets
B. CLAMP & ADAPTER only - If you don't want to buy the Multi Upgrade Kit and only want to upgrade the clamp but none of the other items mentioned in this video, then you need to buy BOTH of the following parts for the same cost as the whole MULTI UPGRADE KIT, so you may as well just buy the kit listed above:
a. KakBritva Wide Central Clamp Adapter: https://www.gritomatic.com/products/gearconnect-for-work-sharp-precision-adjust-kakbritva-wide-central-clamp
b. Wide Central Slit Clamp: https://www.gritomatic.com/products/wide-central-clamp-with-slit
C. For ONLY the V-Block Clamp Support for Work Sharp Precision Adjust (This part is also included in the MULTI UPGRADE KIT): https://www.gritomatic.com/products/clamp-support-for-work-sharp-precision-adjust - The VIDEO for this is here: https://youtu.be/7BRHVA2U6m0
D. For ONLY the 6" Stone Holder for Work Sharp Precision Adjust - 2nd Gen (This part is also included in the MULTI UPGRADE KIT): https://www.gritomatic.com/products/le-series-6-stone-holder-for-work-sharp-precision-adjust-1
E. HEX Screwdrivers
a. 4mm with BALL END - $7.10 - https://www.gritomatic.com/products/ball-end-hex-screwdriver
b. LE Series Hex Screwdriver COMPLETE Set + Holder: https://www.gritomatic.com/products/le-series-hex-screwdriver-set-on-holder
c. Individual HEX driver Available in 5 different sizes: https://www.gritomatic.com/products/hex-screwdriver
+ MUCH more at Gritomatic.com
++++++++++++++++++++++
Support CCE via PATREON: https://www.patreon.com/CCE
Or click "JOIN" on any of my YouTube videos.
++++++++++++++++++++++
CONTACT ME / SOCIAL MEDIA
The BEST way to contact me is via E-mail: CanadianCuttingEdge AT gmail.com
- I am learning to use Instagram more, but it's not yet a strong habit for me yet, https://www.instagram.com/canadiancuttingedge
----
00:00 Introduction
00:52 Items NEEDED
01:55 Disassemble the original clamp
03:09 Prep for Assembly
03:25 Prepart the KakBritva Clamp
04:07 Finally - the ASSEMBLY
06:07 Use the Clamp
07:43 An ALTERNATIVE
----
@gritomatic6834