Let's talk Machine Screws and Spinning Pivots Media
Published: 5 years ago
We deal with these little screws everyday and have destroyed way too many small, precision, machine screws. This video shows a couple techniques for screwing and unscrewing screws that we've learned over the years. We'll show how to unscrew a free spinning pivot screw with a single sided and double sided pivots on a Gent and Archbishop 2.0
*Correction: I said adhesive in regards to Loctite. The correct term is thread locker.
Website:
http://www.ferrumforge.com/
Instagram:
@ferrumforgeKW
@ferrumforgeChris
Machine screw:
1) a threaded fastener, either used with a nut or driven into a tapped hole, usually having a diameter of about 1/4 inch (6.4 mm) or less
2) a fastening screw with a machine-cut thread throughout the length of its shank
*Correction: I said adhesive in regards to Loctite. The correct term is thread locker.
Website:
http://www.ferrumforge.com/
Instagram:
@ferrumforgeKW
@ferrumforgeChris
Machine screw:
1) a threaded fastener, either used with a nut or driven into a tapped hole, usually having a diameter of about 1/4 inch (6.4 mm) or less
2) a fastening screw with a machine-cut thread throughout the length of its shank