Pocket Knife Pivot Screw Adjustment Demonstration Media

If you can’t unscrew your pivot due to excess Loctite, this is the most effective method I've found! Use a heat gun for 15-20 seconds around the pivot area—just be careful not to hold it too close or too long, as it can get hot enough to anodize the titanium. In my demonstration, I couldn’t unscrew it on camera (I’d need three hands for that), but after heating, the pivot unscrewed easily, as if there was no Loctite at all. I then used a dull razor blade to carefully pick the remaining Loctite out of the screw threads.

This method should help keep your knife in perfect working order!