Tormach 1100MX Coolant Wash Down Hose - What every CNC Machine Needs! Media
Published: 3 years ago
Needed a coolant wash down hose for my new Tormach 1100MX. Ordered a few parts from Amazon and had this coolant washdown hose installed in about 15 minutes.
Great addition, I think every CNC machine needs one of these to help with clean up.
Parts List:
1/2" Pneumatic Airline - https://www.amazon.com/gp/product/B08K2MH3C2/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1
Compression Fittings 1/2" OD to 1/4" NPT - https://www.amazon.com/gp/product/B0885S2LLN/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1
10' Flexilla Polyurethane Recoil Air Hose 1/4" - https://www.amazon.com/gp/product/B00TCMB6PU/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&th=1
Box of Push to Connect 1/2" OD Fittings, elbow, y - https://www.amazon.com/gp/product/B08YVF73TS/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1
Huskey Air Ball Valve HDA70100AV - https://www.homedepot.com/p/Husky-1-4-in-Full-Port-Ball-Valve-HDA70100AV/100039901
Huskey Air Blow Nozzle or other brand - could not find link to exact one in video
Couple of 1/2" Nylon wire hangers
I also add some clarification in this video around the 100,000 lines of code message I had on my last project. Bottom line, according to Tormach, feed PathPilot millions of lines of code with no issue. The warning is just to let you know to adjust settings if you want to look ahead at all tool paths.
Next video up will be installing an RC Jet Engine on a Scooter! Really fun project you won't want to miss.
Thanks for watching!
Great addition, I think every CNC machine needs one of these to help with clean up.
Parts List:
1/2" Pneumatic Airline - https://www.amazon.com/gp/product/B08K2MH3C2/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1
Compression Fittings 1/2" OD to 1/4" NPT - https://www.amazon.com/gp/product/B0885S2LLN/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1
10' Flexilla Polyurethane Recoil Air Hose 1/4" - https://www.amazon.com/gp/product/B00TCMB6PU/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&th=1
Box of Push to Connect 1/2" OD Fittings, elbow, y - https://www.amazon.com/gp/product/B08YVF73TS/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1
Huskey Air Ball Valve HDA70100AV - https://www.homedepot.com/p/Husky-1-4-in-Full-Port-Ball-Valve-HDA70100AV/100039901
Huskey Air Blow Nozzle or other brand - could not find link to exact one in video
Couple of 1/2" Nylon wire hangers
I also add some clarification in this video around the 100,000 lines of code message I had on my last project. Bottom line, according to Tormach, feed PathPilot millions of lines of code with no issue. The warning is just to let you know to adjust settings if you want to look ahead at all tool paths.
Next video up will be installing an RC Jet Engine on a Scooter! Really fun project you won't want to miss.
Thanks for watching!