Why I Love The Pierson Pro Pallet System On My Tormach 1100MX-Practical Example Of The Time Savings Media
Published: 1 year ago
3 setups on my CNC and no probing because I have the Pierson Pro Pallet System. Such a time saver.
In the middle of the project the end mill got dull and I pulled the parts of the pallet and moved on to my next set up before I noticed. I had to go back and re cut three parts, was able to do all that and not have to probe once because the pallets, even the one with my vise mounted saved all the probing work and time.
This video also goes through how to use multiple work offsets with your Tormach CNC machine. Because I was using G54 for the parts in the vise and G59.3 for the parts on the pallet, I could change back and forth with ease. I also use a separate work offset for my tool setter.
This video also covers how to quickly duplicate a set up in Fusion 360 and edit it to only cut a portion of the program, for example when a tool gets dull and you don't want to run the full operation. Just takes a few minutes in Fusion and does not interfere with your original program that you may need to use later.
This video also covers how to CNC a multistep operation on the same part where you need to machine one side, then flip it over to machine the backside. For this part I used a Jig Plate where I inverted the part and bolted it down to cut the backside.
The Pierson Pro Pallet system is amazing and using a single point of origin and pallets significantly increases my CNC mill productivity. As you can see here the time save in probing is huge. Going back for re work is simple.
These Grade 5 Titanium Bottle Openers are available on my website.
www.BladesIIB.com
www.Blades2B.com
Thanks for watching!
BladesIIB Knives
In the middle of the project the end mill got dull and I pulled the parts of the pallet and moved on to my next set up before I noticed. I had to go back and re cut three parts, was able to do all that and not have to probe once because the pallets, even the one with my vise mounted saved all the probing work and time.
This video also goes through how to use multiple work offsets with your Tormach CNC machine. Because I was using G54 for the parts in the vise and G59.3 for the parts on the pallet, I could change back and forth with ease. I also use a separate work offset for my tool setter.
This video also covers how to quickly duplicate a set up in Fusion 360 and edit it to only cut a portion of the program, for example when a tool gets dull and you don't want to run the full operation. Just takes a few minutes in Fusion and does not interfere with your original program that you may need to use later.
This video also covers how to CNC a multistep operation on the same part where you need to machine one side, then flip it over to machine the backside. For this part I used a Jig Plate where I inverted the part and bolted it down to cut the backside.
The Pierson Pro Pallet system is amazing and using a single point of origin and pallets significantly increases my CNC mill productivity. As you can see here the time save in probing is huge. Going back for re work is simple.
These Grade 5 Titanium Bottle Openers are available on my website.
www.BladesIIB.com
www.Blades2B.com
Thanks for watching!
BladesIIB Knives